|
Universal, multi /channel burst generator
UG SG 7.11/09 |
UG SG is an universal, multi/channel burst generator, able to excite ultrasonic transducers with the frequency of
500Hz – 500kHz, with regulated amplitude up to 80Vpp and maximum Power of 80W with integrated 16 channel send-receive multiplexer, with continuously regulated amplification for each channel (4.5 to 55dB).
The generator can work with diverse signal acquisition devices. It is especially suited for work with our OPCARD or OPBOX.
|
 |
|
Specification: |
| |
| Power
supply: |
| -
Voltage: |
230V AC / 1A |
| -
Power: |
max 200W |
| Dimensions:
(Length x Width x Height) |
252x262x150 [mm] |
| Parameters: |
| Modes of
work: |
continuous or burst |
| Bandwidth: |
500-500kHz; with 1Hz step |
| Signal amplitude: |
0.2 - 80Vpp; with 0.2Vpp step |
| Burst length: |
max 2000 periods |
| Interval between bursts: |
max 2000 periods |
| Output power: |
max 80W |
| Output impedance: |
min
10Ω: optimal: 16Ω |
| Trigger: |
internal
or external (max 250kHz) |
| Receiving
channel parameters: |
| -
Multiplexer: |
max 16
send - receive channels |
| - Max
input voltage: |
0.5
Vpp |
| -
Receiver bandwidth: |
500Hz
- 500kHz |
| -
Amplification: |
-4.5 -
55.5dB, 0.5dB step |
| - Max
output voltage: |
6Vpp |
| Interface: |
USB
1.1 / 2.0 |
| |
| Description: |
This
burst generator is made for laboratory and industrial use. Due to
the broad spectrum of load impedances it can be used with
almost any ultrasonic transducer. |
| Additional
information: |
| We
can make the device with options and parameters that suits to the
requirements of customer. Please ask us, if you wish special version. |