Przedsiębiorstwo Badawczo-Produkcyjne OPTEL Spółka z o.o. 
 ul. Morelowskiego 30 PL-52-429 Wrocław
 phone: +48 71 329 68 53 fax: +48 71 329 68 52 NIP: 898-10-47-033 
 Research & Development / Ultrasonic Technology / Fingerprint recognition

    

Ultrasonic Testing Card (Board) 
OPCON-01/100 
  

  
  


OPCON-01/100 is particularly well suited for ultrasonic measurements as well as other kinds of measurements which employ multiplexed channels (the card is capable of controlling such devices). Together with the multiplexer OPCOM-01 and ultrasonic probes it could be used as complete ultrasonic testing device. OPCON-01/100 is a short PCI card and can be installed in a standard PC.

  Technical data
  A/D converter:
  - Resolution: 8 bit
  - Sampling frequency: 12.5,25,50 or 100MHz  1
 Analog parameters:
  - Input amplifier gain: -10dB - 50dB  1
  - Input preamplifier   0dB or 10dB1
  - Minimal sensitivity: 0.1mV - 1.6Vpp
  - Maximal sensitivity: 50mV/Div - 0.5Vpp
 Bandwidth: 0,1 - 25MHz
 Input impedance: 50Ohm, 10pF
 Trigger: internal (software)
 Delay time: Post trigger 256us, measurement accuracy better than 1ns
 Data buffer: 256, 512, 1K, 2K,4K,8K,16K or 32K1
 

1 - software selected
  Characteristic of the system 


The system is used mainly for testing of parameter of plastic pipes during extrusion process (wall thickness, diameter, ovality, eccentricity etc.) but can be used for any other purpose, where such card or/and multiplexer are necessary.
  Software Package:


The software (only for Windows NT 4.0/2000/XP) includes all necessary functions for ultrasonic measurements.

Optional it is possible to make software versions for the special needs of the user.

 

Google
www optel
  
Copyright © 1989 - 2009 Optel. All rights reserved.
Limited, registered in the Companies Register by the regional court Wroclaw Fabryczna, VI Industrial Section of KRS, under the number 0000124439, 
NIP: PL 8981047033, REGON 008375538, operating capital 364,500 PLN