Przedsiębiorstwo Badawczo-Produkcyjne OPTEL Spółka z o.o. 
 ul. Morelowskiego 30 PL-52-429 Wrocław
 phone: +48 71 329 68 53 fax: +48 71 329 68 52 NIP: 898-10-47-033 
 Research & Development / Ultrasonic Technology / Fingerprint recognition

    

Automatic Oscilloscope Card (Board)
OPKO-1/80
  

Retail price: 350,- Euro
  

OPKO-1/80 is particularly well suited for ultrasonic measurements as well as other kinds of measurements which employ mechanical scanning elements or multiplexed channels (the card is capable of controlling such devices). OPKO-1/80 is a short (8-bit) ISA card and can be installed in a standard PC computer. It can be also used as a simple scope card.

  
  Technical data
  A/D converter:
  - Resolution: 8 bit
  - Sampling frequency: 80MHz
 Analog parameters:
  - Input amplifier gain: x1 or x2
  - Minimal sensitivity: 0.1mV/Div -1mVpp (with software amplification)
  - Maximal sensitivity: 100mV/Div - 1Vpp
 Averaging 1 - 256
 Bandwidth: 0,1 - 25MHz
 Input impedance: 50Ohm or 1M (jumper)
 Trigger: internal (software), external, max 2 kHz
 Delay time: Post trigger 256us, measurement accuracy better than 1ns
 Pulser: Step pulser, 50V -300V in 8 levels (the voltage depends on the used transducer), 20ns edge falling time, separate, match box size
 Data buffer: 256 or 512 bytes (software selected)

 

Technical description of the OPKO device
   


Google
www optel
  
Copyright © 1989 - 2009 Optel. All rights reserved.
Limited, registered in the Companies Register by the regional court Wroclaw Fabryczna, VI Industrial Section of KRS, under the number 0000124439, 
NIP: PL 8981047033, REGON 008375538, operating capital 364,500 PLN