Przedsiębiorstwo Badawczo-Produkcyjne OPTEL Spółka z o.o. 
 ul. Morelowskiego 30 PL-52-429 Wrocław
 phone: +48 71 329 68 53 fax: +48 71 329 68 52 NIP: 898-10-47-033 
 Research & Development / Ultrasonic Technology / Fingerprint recognition

    

Multiplexer OPMUX-1500
  

  

  


OPMUX-1500 was made for a large array system for ultrasonic inspection of spot welds. Different as other multiplexers, that we are offering it is able to send and receive with any channel (different channel can send and receive). Based on the experience, collected during the development of this multiplexer we are able to make devices with any amount of channels, if necessary. Together with the card OPCARD and ultrasonic probes it could be used as complete ultrasonic testing device (ie. for the measurement of a large amount of spot welds at once, for the use on the production line) Each channel has separate pulser&receiver.


  Technical data    Features and Specifications

Channels:

 13441

Pulser circuit waveforms: The rising edge of the Trig In signal initiates the transducer charging process which takes about 3us.  

Pulse amplitude range

  100V1

Max cable length between computer and the box

 5m

Connectors BNC:

  Trigger input
Signal output

Connectors with transducer modules: each board is directly connected with 42 channels transducer array.

Din64

 Control signals/Power supply

1 - software selected

 

Google
www optel
  
Copyright © 1989 - 2009 Optel. All rights reserved.
Limited, registered in the Companies Register by the regional court Wroclaw Fabryczna, VI Industrial Section of KRS, under the number 0000124439, 
NIP: PL 8981047033, REGON 008375538, operating capital 364,500 PLN